SS Body Water Purifier
Ultra Tec Special Stainless steel body water purifier
Rust, corrosion free no risk of breakage even in higher pressure. In stage 1, water flows through a 10" sediment filter cartridge that removes sediment, silt, sand and dirt. Also extends the life of the water filters In stage 2, water flows through granulated activated carbon (GAC). GAC is universally recognized and widely used as an effective adsorbent for a wide variety of organic contaminants, such as chlorine (99.9%), chemicals linked to cancer (THM's, benzine) pesticides, herbicides, insecticides, volatile organic compounds (VOC's), PCB's, MTBE's and hundreds of other chemical contaminants that may be present in water that create bad taste and odors. Carbon is extremely porous and provides a large surface area for contaminants to collect. Carbon-only filters must also use their capacity for chlorine removal, resulting in a shortened life. They also may use a bituminous coal carbon, which is good at removing chlorine, but not as effective at removing chemicals. We use a high-grade coconut shell carbon that is most effective at removing chemicals. Coconut shell carbon provides a significantly higher volume of micro-pores than either coal, wood or lignite based carbon. As a result, it is more effective than other carbon types in removing trihalomethanes (THM's) and other chemicals from municipally supplied water. Since our ACTIVATED media removes the chlorine before it reaches the carbon block stage, the carbon capacity is not wasted on chlorine and is free to concentrate more effectively on organic contaminant. In stage 3, water flows through Carbon block one - micron filter block carbon (1 micron equals 1/25,000th of an inch), which remove suspended particles such as silt, sediment, cyst (Giardia, Cryptosporidium), sand, rust, dirt, and other un-dissolved matter.