Water Filters UAE

TDS D2 Water Quality Monitor

TDS D2 Water Quality Monitor

Another best device for water testing, TDS D2 and water quality monitoring. It is a small and handy water quality monitor.

INTRODUCTION
1. Range and unit: 1-1999us/cm (1-1000PPM)
2. Probe connector: 1/2 "MALE x 2PCS
3. Power: 110V/60HZ OR 220V/50HZ
4. Power line length : 180cm,sensor line : 190cm
5. Panel Size : L13.4XW3.2XH5.4cm

Installation
1. Measure the dimension 135.5cm W X 65.2cm H and fix the meter penal
2. Remove the Connector from Probes,
3. Secure the fitting detection position,
4. Probe Puts into the fitting, and fix nut,
Reading interpretation
Swith 0 : Screen no display
Switch 1 and 2 : for the first time, turn switch to 1 and get the reading, and then also check Switch 2 reading
The reading difference 1 and 2 can specify to be raw water or filtered water.

Remark
Two Probes with the same detecting effect

Write to us to order or ask for more information: